Interior Emulsion Paint/Wall Paint/Wall Coating/Acrylica Paint/Latex Paint
Features:
1. High performance but low price
2. Strong hiding power
3. Easy application
4. Good leveling property
Technical Indexes
Typical Painting System
Surface Preparation
Surfaces must be thoroughly clean, dry and free from all loose dirt, chalk or powder. New surfaces such as plaster and concrete should be fully dry before painting.
Notes for use:
L Mix well after paint can is opened.
L To prevent hardening of the paint, the can should be closed during the interval of application. Thinned paint should not be poured back to the original can.
L Recoat interval should be prolonged in winter. To prevent the surface from erosion and avoid the precipitation of alkaline component, wall surface drying time should be relative long
L Stop application when temperature is below 10ºC, or humidity over 85%.
L Apply with Maydos matching primer for best performance.
L For information of Manufacture Date, Lot No., Net weight and Expiring Date, please refer to the product label.
Features:
1. High performance but low price
2. Strong hiding power
3. Easy application
4. Good leveling property
Technical Indexes
| Appearance | White uniform viscous liquid |
| Gloss | Matt |
| Solids content | 57.86±2% |
| Specific gravity | 1.493±0.05 |
| VOC | <50g/L |
| Contrast ratio | > 0.90 |
| Alkali resistance (24 h) | Coating no changes |
| Emulsion ratio | 11%~15% |
| Stability ( -5ºC) | No Degenerating |
| Scrubbing resistance | > 5000 times |
| Pigment | Non-lead pigment |
| Binder | Acrylic copolymer |
| Solvent | Water |
| Application method | Brush Roller Spray guns |
| Theoretical coverage | 8~10/ kg / coat |
| Mixing ration with water | 10% ~ 15% of water |
| Touch drying / Recoat time | 25 min/ 25ºC / At least 2 hours |
| Application environment | Humidity ≤85%, temperature ≥5ºC |
| Tools clean | Clean the tools with water |
| Storage | Cold & dry places, avoid freezing |
| Packing | 5L=6kg 18L=22kg |
Typical Painting System
| SURFACE | SYSTEM |
| Normal, Sound Surface | Primer: Maydos Anti-alkali Primer W1210 (1 coat) Topcoat: Maydos Interior High-Class Emulsion Wall Paint AN3006 (2 coats) |
Surface Preparation
Surfaces must be thoroughly clean, dry and free from all loose dirt, chalk or powder. New surfaces such as plaster and concrete should be fully dry before painting.
| New Wall | 1. Fresh concrete must cure at least 30 days and meet application requirement before plastering. 2. The plaster must not be too soft. Sand and dust off after dry. 3. To resist alkalis and to obtain best results first apply one coat of Maydos anti-alkali primer W1210 |
| Previously Painted Surface | 1. Remove powdery or flaking paint by scraping followed by using a suitable abrasive paper and dusting off. 2. Fill the defects with proper filler 3. To seal powdery surfaces and to obtain best results first apply one coat of Maydos anti-alkali primer W1210 |
| Fungus Growth Wall | 1. Remove all the fungus by scraping followed by using a suitable abrasive paper and dusting off 2. Wash the surface with appropriate fungus washing. Rinse with clean water and wait till dry 3. To obtain best results first apply one coat of Maydos anti-alkali primer W1210 |
Notes for use:
L Mix well after paint can is opened.
L To prevent hardening of the paint, the can should be closed during the interval of application. Thinned paint should not be poured back to the original can.
L Recoat interval should be prolonged in winter. To prevent the surface from erosion and avoid the precipitation of alkaline component, wall surface drying time should be relative long
L Stop application when temperature is below 10ºC, or humidity over 85%.
L Apply with Maydos matching primer for best performance.
L For information of Manufacture Date, Lot No., Net weight and Expiring Date, please refer to the product label.