Sound insulation/thermal insulation EPS cement sandwich panel/exterior wall sandwich panel

Sound/Thermal Insulation EPS Cement Sandwich Panels/sandwich panel for exterior wallProduct DescriptionCement board (face panel) + Cement and EPS (core) + cement board (face panel)ApplicationInterior and exterior partition on steel or concrete structure building, for new construction, additions or renovations.&nbs

Featured Products

Sound/Thermal Insulation EPS Cement Sandwich Panels/sandwich panel for exterior wall

Product Description

Cement board (face panel) + Cement and EPS (core) + cement board (face panel)

Sound/Thermal Insulation EPS Cement Sandwich Panels/Sandwich Panel for Exterior Wall

Application

Interior and exterior partition on steel or concrete structure building, for new construction, 

additions or renovations. 

It can widely be applied to wall materials of various high and low buildings such as: bank, office 

building, hospital, 

school, hotel, shopping mall, amusement hall, old house reconstruction, residence and workshop.

Sound/Thermal Insulation EPS Cement Sandwich Panels/Sandwich Panel for Exterior Wall
Sound/Thermal Insulation EPS Cement Sandwich Panels/Sandwich Panel for Exterior Wall
 

Advantages

1. Environmental Protection

2. Fireproofing

3. Increasing usable floor area

4. Anti-seismic Good Integrity

5. Damp Proof,Waterproof

6. Sound insulation

7. Contraction simple, Efficient, Fast

8. Heat insulation, Heat preservation

9. Opening slot, Wiring, Hanging

10. Light, Economic

Sound/Thermal Insulation EPS Cement Sandwich Panels/Sandwich Panel for Exterior Wall

 

 Size

Size(length*width*thickness)Weight(kg/M2)Application Packing(pcs/per 20'GP)Apperance
2440/2270x610x60mm45-48Roof315pcs/436m2Solid core
2440/2270x610x75mm50-53Interior wall252pcs/349m2100% non-asbestos
2440/2270x610x90mm55-58interior/Exterior wall207pcs/287m2waterproof
2440/2270x610x100mm60-65interior/exterior wall189pcs/262m2fireproof
2440/2270x610x120mm65-70exterior wall/Floor153pcs/m2High strength
2440/2270x610x150mm80-90exterior wall126pcs/m2 

Technical Index

ItemTesting Indexes
Thinkness[mm]607590120150180
Anti-impact Capacity/Items
[standard sandbags/times]
≥5≥5≥5≥5≥5≥5
Anti-bending Damage Load
[times over deadweight]
≥3.0≥3.0≥3.0≥5.0≥5.0≥7.0
Compressive Stregth [Mpa]≥3.5≥3.5≥3.5≥3.5≥3.5≥3.5
Softening Coefficient≥0.8≥0.8≥0.8≥0.8≥0.8≥0.8
Surface Density [kg/m2]≤70≤70≤90≤110≤110≤130
Moisture Rate [%]≤10≤10≤10≤8≤8≤8
Drying Shrinkage Value [mm/m]≤0.5≤0.5≤0.5≤0.5≤0.5≤0.5
Hang Force [N]≥1000≥1000≥1000≥1000≥1000≥1000
Sound Insulation Capacity In The Air [dB]≥35≥35≥40≥45≥50≥55
Fire Endurance [H]≥1.5≥1.5≥2.5≥3.0≥4.5≥6.5
Heat Transfer Coefficient [W/m2.k]≤2.0≤2.0≤2.0≤2.0≤2.0≤2.0
Inner Radiation Index≤1≤1≤1≤1≤1≤1
Outer Radiation Index≤1≤1≤1≤1≤1≤1
 

Installation Steps:                                                                    


1. Setting the line and carrying the board into position

2. Using hand-hold electric saw freely according to the specification of wall, 

3. Sizing the bump slot and then spread the baseline and the bump slots with the ZJT special adhesives

4. Carrying the board prepared to be installed to the installation place, correcting the wall board by Special tools, and making it close tightly, and let the polymer mortar squeeze out into full and then fixing it with a wedge temporarily

5. Correcting, fixing Using a guiding rule of two meters to check the vertical and leveling correction. Then using 6mm or 8mm reinforcing steel bar and ribs adding with construction sealant to fix. 

6. Grooving and piping Cutting a groove by a hand-hold electric saw for burying the concealed wire and switch box.Then filling with polymer mortar after installation. 

7. Sticking anti-cracking tape

8. Installing doorcase

9. Facing ceramic tile, decorative sheet, coating and wall paper sticking ceramic tiles,or wood facing panels and coating directly on the installed wall without plastering.

Sound/Thermal Insulation EPS Cement Sandwich Panels/Sandwich Panel for Exterior Wall

 

FAQ:                                                                                           

Q1: Why should I choose ZJT panel?
A: We are a professional EPS cement sandwich panel manufacturer in China.

We have professional work team, can provide you top quality products and excellent services.

Q2: What is your approximately export amount every month?
A: Loading & shipping about 50 40GP containers per month

Q3: What is your main market?
A: Our EPS cement sandwich panels are desired all over the world, and the main market is Asia,Africa, Middle East, South America, and developing countries.

Q4: How can I get samples for testing?
A: We will send you free samples, if you have DHL, UPS or Fedex account, that will be the best,if have not, you can transfer the shipping cost to us, we will send the samples to you by our shipping account.


Q5: What is your delivery time?
Normally, within 15 days. If we have the needed product in stock, can be shipped within 7 days.For bulk order, delivery time depends on the quantity.

Q6: Do you have any certificates or qualifications?
A: Yes. We have passed TUC&CE&ISO9001. Also, we have done fireproof test, the fireproof performance of our sandwich panel is more than 4 hours.





Contact Now!!!

Xiamen Zhongjingtai Building Materials Co.,Ltd
Tel:+86-592-5216902
Fax:+86-592-5216317
Mobile:+8613555295796
 
 
Website:Http://zjteps.en.made-in-china.com



 
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours