Product Description
We are specialized in manufacturing & exporting ZJT light weight energy saving composite sandwich wall panel for residential and commercial projects with good price.
Material Description
Face: Calcium Silicate Board
Core materials: Cement+EPS Polystyrene Foam+Sand
Profication → Length: 2270/2440mm
→ Thickness: 60/75/90/100/120/150mm
→ Width: 610mm
Properties
| Item | Parameter Index Specifications | ||||||
| 60mm | 75mm | 90mm | 100mm | 120mm | 150mm | ||
| 1 | Anti-impact capacity/times | ≥5 | ≥5 | ≥5 | ≥5 | ≥5 | ≥5 |
| 2 | Anti-bending damage load/times over deadweight | ≥3.0 | ≥3.0 | ≥3.0 | ≥3.0 | ≥5.0 | ≥5.0 |
| 3 | Compressive strength/Mpa | ≥3.5 | ≥3.5 | ≥3.5 | ≥3.5 | ≥3.5 | ≥3.5 |
| 4 | Softening coefficient | ≥0.8 | ≥0.8 | ≥0.8 | ≥0.8 | ≥0.8 | ≥0.8 |
| 5 | Surface density(kg/m²) | ≤70 | ≤70 | ≤90 | ≤90 | ≤110 | ≤110 |
| 6 | Moisture rate(%) | ≤10 | ≤10 | ≤10 | ≤10 | ≤8 | ≤8 |
| 7 | Dring shrinkage value(mm/m) | ≤0.5 | ≤0.5 | ≤0.5 | ≤0.5 | ≤0.5 | ≤0.5 |
| 8 | Hang force(N) | ≥1000 | ≥1000 | ≥1000 | ≥1000 | ≥1000 | ≥1000 |
| 9 | Sound insulation capacity in the air(dB) | ≥35 | ≥35 | ≥40 | ≥40 | ≥45 | ≥50 |
| 10 | Fire endurance(h) | ≥1.5 | ≥1.5 | ≥2.5 | ≥2.5 | ≥3.0 | ≥4.5 |
| 11 | Heat transfer coefficient(w/m².k) | ≤2.0 | ≤2.0 | ≤2.0 | ≤2.0 | ≤2.0 | ≤2.0 |
| 12 | Inner radiation index | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 |
| 13 | Outer radiation index | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 |
| 14 | Frost resistance(shall show no visible cracks and surface without change) | _ | _ | shall show no visible cracks and surface without change | |||
| 15 | The combustion properties(A1 or A2) | _ | _ | A1 or A2 | |||
Packing → Free packing, normal pallet + packing belt
→ Standard exporting packing, good pallet+pearl wool+corner protective paper+packing belt+plastic thin film
→ Loading: Normally 18 pallets per 20' container or according to clients' requirements
Application
widely used:
residential building, school,hospital, prefab house, office,
hotel, public construction, entertainment place,etc.
wall/exterior wall/interior wall/super high wall/abnormity wall,
roof, floor, pipe, fire well, equipment partiton,etc.
Advantages
↓ ↓ ↓
Compared with the traditional building materials, ZJT light weight energy saving composite sandwich wall panel has more practical advantages when used in different kinds of buildings.
| Advantages | |
| 1).Heat Insulation and Preservation | The major material is polystyrene grains and other anti-freezing and heat preserving environmental protection materials, which can adjust the indoor temperature at a constant range to achieve the effects of ecological adjustment. |
| 2).Waterproof and Fireproof | The face panel of energy-saving boards on both side are 5mm calcium silicate fireproof board and the main materials are the mixture of cement, sand, fly ash, etc. |
| 3).Sound Insulation and Absorption | The inside construction material (EPS polystyrene grain) functions well in sound insulation and sound-absorbing. |
| 4).Easy Construction and Time Saving | For the same construction work that takes 12 people and 60 minuses to complete with traditional blocks, only 3 people and 60 minutes will do with boards, thus can save a lot of labor and time cost for the construction part. |
| 5).High Intensity and Quake Proof | The energy saving boards are all with high intensity and the earthquake resistance can reach 8.5 magnitudes. |
| 6).Space and Cost Saving | For its thickness and lightweight features, the building area is largely increased and saves the cost construction structure a lot. |
| 7).High Recycled Ultilization Ratio | The panel is solid and strong physical performance,anti-corrosion,high strength and low damage rate.If ZJT's dry splicing method was put to use ,wall panel reuse rate would up 93%which can save 71%~95% of wall panel cost. |
| 8).Strong Hanging Force and can be Slotted | ZJT panel can meet various of demand, be easily slotted hole and also will reduce dust and increase the operation environment quality |
Auxiliary Materials
FAQ
1. What is your mainly products?
Our mainly products are sandwich wall panel and color steel panel .
2. What is your delivery time?
One 20'GP container, about 10 working days
3. How about the samples?
The samples is free, but the delivery cost will be on ur account, and we will deduct it after you place the order.
4. What is your time of making samples?
Usually we will take 1~3 days to make the sample.
5. What is your payment terms?
Normally we accept 30% T/T in advance,70% after shipment.
Or Irrevocable L/C
6. What is the shipping port?
Xiamen port
Contact Us