Exterior Wall EPS Concrete Panel Cement Sandwich Wall Panel Manufacturer

exterior eps concrete board cement sandwich wall panel manufacturersProduct DescriptionZJT  Light weight insulated concrete wall panel is designed for modern high building, Eco-friendly building, frame structure and low buildings, its birth marks the replacement of the old style wall building materials by the new things, wh

Featured Products

exterior eps concrete board cement sandwich wall panel manufacturers

Product Description

ZJT  Light weight insulated concrete wall panel is designed for modern high building, Eco-friendly building, frame structure and low buildings, its birth marks the replacement of the old style wall building materials by the new things, which is a big jump in the aspect of wall building materials modernization. Our panel is made of core materials(expended polystyrene bead aggregates, Portland cement, fly ash, sand) and 5 mm smooth non-asbestos fiber cement board. From production to installation, there no any pollution creates, except the environmental benefits, and it has many economic benefits too, so it is more popular and popular between business and government.

Exterior EPS Concrete Board Cement Sandwich Wall Panel Manufacturers
22270*610*7567interior wall
32270*610*9077interior wall
42270*610*10087interior&exterior wall&floor
52270*610*12098exterior wall
62270*610*150115exterior wall

Installation Steps

ZJT  light weight insulated wall panel can be cut freely according to your size, and it is easy to carry and install, and no need to plaster after finishing wall, one worker can finish construction about 20 square meters at least per day. There are simple installation accessories, such as adhesive cement mortar, steel bar, and wooden wedge, steel angel and "U" steel for option.

Exterior EPS Concrete Board Cement Sandwich Wall Panel Manufacturers


Floor System
Light weight compound sandwich panel can be innovatively used as floor board. Besides the basic characteristics like sound insulation, waterproof, dampproof, this system has the outstanding advantages such as hight load-bearing capacity, anti-static electricity, friction resistance, high strength, convenient for wire groove and water pipe inbuilt, corrosion resistance, no deformation, no split, etc., which is much suitable for the fields including the floor plate of additional top floor, factory, workshop, warehouse, etc.

Villa&Exterior Wall System
Light weight compound sandwich panel can automatically adjust indoor air and water content with the season and climate changes, which can keep the temperature at an invariable temperature level, and such ecology effect just goes with the tide of modern residential building. It is widely applied to various modular house, low buildings, apartment, villas, and city house, etc.

Interior Partition System
With excellent fireproof, best hanging force, sound insulation, heat insulation, waterproof, easy
Installation and the like characteristics, light weight compound sandwich board have been widely
Applying to the special positions like partition panel of high-rise and mega-high-rise buildings.

Roof System
Light weight compound sandwich panel roof system brings brand-new added value and application idea to the traditional roof construction. This system not only solves the problem of roof leakage, but also has the advantages such as heat insulation, neat joint surface, high temperature resistance, etc. The features of light weight and hight strength reduce the use of roof beam-column, reduce the consumption of materials, improve security; Its easy construction time, which bring out its hight integrated performance-price ratio.

Load containers data
Items(mm)    length*width*thickness single(Pc) Load by 20'GP 

ZJT Sandwich Panel Advantages
1).Heat Insulation and Preservation The major material is polystyrene grains and other anti-freezing and heat preserving environmental protection materials, which can adjust the indoor temperature at a constant range to achieve the effects of ecological adjustment.
2).Waterproof and FireproofThe face panel of energy-saving boards on both side are 5mm calcium silicate fireproof board and the main materials are the mixture of cement, sand, fly ash, etc.
3).Sound Insulation and AbsorptionThe inside construction material (EPS polystyrene grain) functions well in sound insulation and sound-absorbing.
4).Easy Construction and Time SavingFor the same construction work that takes 12 people and 60 minuses to complete with traditional blocks, only 3 people and 60 minutes will do with boards, thus can save a lot of labor and time cost for the construction part.
5).High Intensity and Quake ProofThe energy saving boards are all with high intensity and the earthquake resistance can reach 8.5 magnitudes.
6).Space and Cost SavingFor its thickness and lightweight features, the building area is largely increased and saves the cost construction structure a lot.
7).High Recycled Ultilization Ratio The panel is solid and strong physical performance,anti-corrosion,high strength and low damage rate.If ZJT's dry splicing method was put to use ,wall panel reuse rate would up 93%which can save 71%~95% of wall panel cost.
8).Strong Hanging Force and can be Slotted ZJT panel can meet various of demand, be easily slotted hole and also will reduce dust and increase the operation environment quality.

1. It is heat insulation, also keep warm

2. Fireproof and high temperature resistant: Throw it into boiling water or in fire, last for four hours, it's nonflammable

Thickness(mm)Fire endurance(H)

3. Moistureproof and waterproof:

 The surface is calcium silicate board,waterproof and moistureproof 


Materials and the interlocking concave-convex groove make it soundproof

Sound insulation capacityDB≥35≥40≥40≥45≥50≥55
Anti-bending damage loadTimes of self-weight≥5≥5≥5≥7≥8≥9
Compression strengthMpa≥4.2≥4.2≥4.8≥4.8≥5.14≥5.14
Anti-impact strengthTimes of self-weight≥5.0≥5.0≥5.0≥5.0≥5.0≥5.0
Load capacityN≥1000≥1000≥1000≥1000≥1000≥1000

Exterior EPS Concrete Board Cement Sandwich Wall Panel Manufacturers

Projects which used in ZJT EPS sandwich wall panel
Exterior EPS Concrete Board Cement Sandwich Wall Panel Manufacturers

Exterior EPS Concrete Board Cement Sandwich Wall Panel Manufacturers

Exterior EPS Concrete Board Cement Sandwich Wall Panel Manufacturers

How to install 

  1. Set line:set line and carry panel in position.
  2. Saw panel:use hand-hold eletrict saw to cut freely.
  3. Sizing:sizing cement on tenon side of two panels then spread ploymer mortar on one tenon.
  4. Installation:carry panel prepared to be installed panel.
  5. Plant bar in wall and pillar:dry one hold in the original pillar or wall and fix panel by one steel bar.
  6. Corret and fix:use one guiding ruler to check and level correction.
  7. Plant bar in structure beam:drill one hole in structure beam and plant one reversed 7 type shaped steel bar to fix with wall panel.
  8. Plant bar in floor:dirll one hole in floor and panlt 7 types shaped steel bar to fix with wall panel.
  9. Plant bar between wall panel:plant one 200mm length steel bar in the angle or 45 degree to fix between two panels.
  10. Install electric wire and switch:set lines on the place required to be settled with concealed wire and switch box.
  11. Grout and fill slurry:fill and handle corrected wall panel with ploymer mortar.
  12. Scrapping ash and sticking anti-crack cloth,coating:stick anti-crack cloth and brush coating after grouting slurry.

Clients Visited
Exterior EPS Concrete Board Cement Sandwich Wall Panel Manufacturers

Our main export markets include below countries

African Market: Reunion Island, Madagascar, Mayotte, Comoros Island, Mauritius, Kenya, Tanzania, Zambia and Uganda, Ghana, Ethiopia, Mozambique, Congo, Burkina Faso

Asian market: Philippines, Sri Lanka, Indonesia, Singapore, India, Malaysia, Vietnam

Mid-Eastern Market : Qatar ,Dubai, Behrain, Jordan, Saudi Arabia

South-American Market : Brazil, Venezuela, Chile, Columbia, Dominica Republic, Ecuador

Pacific Ocean market: Australia, New Zealand, Papua New Guinea, Tahiti, Fiji


Q: Are you trading company or manufacturer ?

A: We are factory, TOP 5 biggest wall panel manufacturer in China.

Q: How long is your delivery time?

A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: Where is your factory and port of departure?

our factory is in  XIAMEN FUJIAN China, and our nearest port is xiamen port, and  is available too. There are developed expressways to reach sea ports, and our have our own transport vehicle, so we have a cheaper shipping cost.


Contact Person: Zoe Zeng
Mobile Phone: +8618559217326

Tex: +86-592-5216902  Fax: +86-592-5216317
Website: http://zjteps.en.made-in-china.com
Company Address: Xiamen ZhongJingTai Building Materials CO., Ltd.
                      Unit 2A, Lianchang Building, No 6-8Huli District,Xiamen, China.


Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours